January 13th (Wednesday) - STATEWIDE Farm / Construction / Municipality EQUIPMENT Online Consignment Auction

0
Bidding Opened:Thursday, January 7, 2021 5:05 pm EST
Bidding Closed:Wednesday, January 13, 2021 7:00 pm EST
BIDDING CLOSED!
Kuhn FC313RF Front Mower Hay Mower, Has Conditioning Rolls, Cutter Bar Broken (Have Parts to Fix)

Item #1

Kuhn FC313RF Front Mower Hay Mower, Has Conditioning Rolls, Cutter Bar Broken (Have Parts to Fix)
Control Number:CN1091
$1,025.00USD
#3208636 Bids
2013 Polaris 800 Ranger, (887 Hours, 7068 Miles), Runs Well, Clean and Clear Title

Item #2

2013 Polaris 800 Ranger, (887 Hours, 7068 Miles), Runs Well, Clean and Clear Title
Control Number:CN1030
$7,914.00USD
#887491 Bids
Lincoln Welder 350 MP, Capable of Welding Aluminum and Steel, (Purchased New September 14, 2012 for $5400), Always Housed in Heated Shop, Very Nice Machine, Mostly Used for Welding Aluminum, Tank NOT Included

Item #3

Lincoln Welder 350 MP, Capable of Welding Aluminum and Steel, (Purchased New September 14, 2012 for $5400), Always Housed in Heated Shop, Very Nice Machine, Mostly Used for Welding Aluminum, Tank NOT Included
Control Number:CN1014
$3,500.00USD
#4438474 Bids
Befco Heavy Duty 84" Rear Back Blade, Left or Right Offset, 5-Tilt Positions, 3-Point Linkage, Cat 1 and 2, Reversible Cutting Blade

Item #4

Befco Heavy Duty 84" Rear Back Blade, Left or Right Offset, 5-Tilt Positions, 3-Point Linkage, Cat 1 and 2, Reversible Cutting Blade
Control Number:CN1024
$925.00USD
#625034 Bids
JCT 72" Brush Hog for Skid Steer, New, Never Used

Item #5

JCT 72" Brush Hog for Skid Steer, New, Never Used
Control Number:CN1041
$2,100.00USD
#1358237 Bids
Harig 6x18 Surface Grinder with Tru-Tilt Magnetic Chuck, Purchased Used and Never Taken it Off the Pallet

Item #6

Harig 6x18 Surface Grinder with Tru-Tilt Magnetic Chuck, Purchased Used and Never Taken it Off the Pallet
Control Number:CN1083
$810.00USD
#2711427 Bids
Crawler Carrier, IHI IC30, 3-Cylinder Isuzu Diesel, (1594 Hours if Gauge is Correct), Just Serviced, Good Tracks, 2-Speed Transmission, Hydrostatic Drive, Hydraulic Dump Box with Automatic Tailgate that Can also be Folded Down, Both Sides of Box Fold Down, Runs and Drives Well but Seems Like the Engine Doesn’t have a Lot of Power (Might Need Freshened Up), Very Handy for Cutting Wood

Item #7

Crawler Carrier, IHI IC30, 3-Cylinder Isuzu Diesel, (1594 Hours if Gauge is Correct), Just Serviced, Good Tracks, 2-Speed Transmission, Hydrostatic Drive, Hydraulic Dump Box with Automatic Tailgate that Can also be Folded Down, Both Sides of Box Fold Down, Runs and Drives Well but Seems Like the Engine Doesn’t have a Lot of Power (Might Need Freshened Up), Very Handy for Cutting Wood
Control Number:CN1078
$6,300.00USD
#3674659 Bids
Land Pride Rotary Tiller with Reverse Tilling Action, 70" Working Width, Few Broken Tines

Item #8

Land Pride Rotary Tiller with Reverse Tilling Action, 70" Working Width, Few Broken Tines
Control Number:CN1025
$1,175.00USD
#2439863 Bids
Pequea 1140 Hay Maker Rotary Rake, 11' Working Width, New Gear Box Spring of 2020 (400 Acres on New Gear Box), Hydro Lift, Cylinder has a Slow Leak, Comes with Windrow Shoot

Item #9

Pequea 1140 Hay Maker Rotary Rake, 11' Working Width, New Gear Box Spring of 2020 (400 Acres on New Gear Box), Hydro Lift, Cylinder has a Slow Leak, Comes with Windrow Shoot
Control Number:CN1143
$3,500.00USD
#1107753 Bids
1988 Kenworth T600, 3406 Cat, 425 hp, 13-Speed, New Rear Tires, Frame has been Shortened, Mechanically Sound, Clean and Clear Title

Item #10

1988 Kenworth T600, 3406 Cat, 425 hp, 13-Speed, New Rear Tires, Frame has been Shortened, Mechanically Sound, Clean and Clear Title

Control Number:CN1134
$20,350.00USD
#20511160 Bids
Hoof Trimming Chute, Also Perfect for 4-H Prepping, Galvanized, Good Condition

Item #11

Hoof Trimming Chute, Also Perfect for 4-H Prepping, Galvanized, Good Condition
Control Number:CN1068
$360.00USD
#3393222 Bids
Sunflower Disk Ripper 14' Model 4306-14, John Deere 915 V-Ripper, 5-Standards at 30" Spacing, Attached by 3-Point Hitch, All Tires are in Decent Condition and Hold Air, Disk Gang Bearings Move Freely

Item #12

Sunflower Disk Ripper 14' Model 4306-14, John Deere 915 V-Ripper, 5-Standards at 30" Spacing, Attached by 3-Point Hitch, All Tires are in Decent Condition and Hold Air, Disk Gang Bearings Move Freely
Control Number:CN1029
$2,100.00USD
#739562 Bids
Willmar Super 600 Fertilizer Spreader, 6-Ton 50' Spread, 540 PTO, Hydraulic Engagement, Tarp, Always Housed

Item #13

Willmar Super 600 Fertilizer Spreader, 6-Ton 50' Spread, 540 PTO, Hydraulic Engagement, Tarp, Always Housed
Control Number:CN1106
$10,600.00USD
#2347248 Bids
Pneumatic Air Lift, Gray Brand TNT 550, (14,000 lb. Max Lift), 2-Sets of Lifting Shoes, Reconditioned Few Years Back and Not Much Use Since, Great Condition

Item #14

Pneumatic Air Lift, Gray Brand TNT 550, (14,000 lb. Max Lift), 2-Sets of Lifting Shoes, Reconditioned Few Years Back and Not Much Use Since, Great Condition
Control Number:CN1071
$1,200.00USD
#3196342 Bids
1996 John Deere 9500 Combine, (5196 Engine Hours, 3509 Separator Hours), Many New Parts on it Recently and New Belts within the Last Year (Call for List of Work Done), Has Ag Leader Yield Monitor System (No Monitor), Runs Well

Item #15

1996 John Deere 9500 Combine, (5196 Engine Hours, 3509 Separator Hours), Many New Parts on it Recently and New Belts within the Last Year (Call for List of Work Done), Has Ag Leader Yield Monitor System (No Monitor), Runs Well
Control Number:CN1008
$19,500.00USD
#4439081 Bids
Garage Doors, 3-Doors, 10' x 9', 5-Panels per Door, Comes with Springs and Track, No Hinges

Item #16

Garage Doors, 3-Doors, 10' x 9', 5-Panels per Door, Comes with Springs and Track, No Hinges
Control Number:CN1092
$560.00USD
#4327740 Bids
International Industrial Loader, Came Off 2500 Series A Loader Tractor, Bucket is 7'W x 31"D x 28"T, Sitting for Years, Bucket Needs Repair, Hoses Need Replaced, Cylinders Appear to Look Good, Loader Structure Appears in Good Condition, Trailer NOT Included

Item #17

International Industrial Loader, Came Off 2500 Series A Loader Tractor, Bucket is 7'W x 31"D x 28"T, Sitting for Years, Bucket Needs Repair, Hoses Need Replaced, Cylinders Appear to Look Good, Loader Structure Appears in Good Condition, Trailer NOT Included
Control Number:CN1149
$310.00USD
#1388935 Bids
2020 Feed Quality Clean Wheat Straw 3' x 3' x 8' Rotor Straw, 600 lb. Bales, Bright Straw, Baled Dry, Housed Dry, Seller Can Load for Buyer, NOTE:  You are placing a Bid by the TON, Must Purchase a Minimum of 5-Tons (Can Purchase up to 50 Tons, Possibly More), Trucking Available for a Fee

Item #18

2020 Feed Quality Clean Wheat Straw 3' x 3' x 8' Rotor Straw, 600 lb. Bales, Bright Straw, Baled Dry, Housed Dry, Seller Can Load for Buyer, NOTE: You are placing a Bid by the TON, Must Purchase a Minimum of 5-Tons (Can Purchase up to 50 Tons, Possibly More), Trucking Available for a Fee

Control Number:CN1015
GRP1
$95.00USD
#2879115 Bids
2020 Feed Quality Clean Wheat Straw 3' x 4' x 8' Rotor Straw, 600 lb. Bales, Bright Straw, Baled Dry, Housed Dry, Seller Can Load for Buyer, NOTE:  You are placing a Bid by the TON, Must Purchase a Minimum of 5-Tons (Can Purchase up to 50 Tons, Possibly More), Trucking Available for a Fee

Item #19

2020 Feed Quality Clean Wheat Straw 3' x 4' x 8' Rotor Straw, 600 lb. Bales, Bright Straw, Baled Dry, Housed Dry, Seller Can Load for Buyer, NOTE: You are placing a Bid by the TON, Must Purchase a Minimum of 5-Tons (Can Purchase up to 50 Tons, Possibly More), Trucking Available for a Fee

Control Number:CN1016
GRP1
$95.01USD
#2879113 Bids
1950 Farmall Super A Tractor, (Complete Restore: Engine, Wiring, Radiator, Brakes, Seat Assembly), Parade Ready

Item #20

1950 Farmall Super A Tractor, (Complete Restore: Engine, Wiring, Radiator, Brakes, Seat Assembly), Parade Ready
Control Number:CN1137
$1,650.00USD
#2745876 Bids
1986 International 9670 Semi Tractor, 285/75R24.5 Bud Wheels, 400 Big Cam Cummins, 10-Speed Transmission, 4.11 Gear, Wet Kit, Clean and Clear Title

Item #21

1986 International 9670 Semi Tractor, 285/75R24.5 Bud Wheels, 400 Big Cam Cummins, 10-Speed Transmission, 4.11 Gear, Wet Kit, Clean and Clear Title
Control Number:CN1056
$4,500.00USD
#4404454 Bids
Amity Beet Defoliator Model 41222, 12-22" Row, Front Drum L Knives, Back Two are Rubber Flails, Gone through and Ready to Go

Item #22

Amity Beet Defoliator Model 41222, 12-22" Row, Front Drum L Knives, Back Two are Rubber Flails, Gone through and Ready to Go

Control Number:CN1001
$2,550.00USD
#1833140 Bids
Brillion XXL-184 44' Packer

Item #23

Brillion XXL-184 44' Packer
Control Number:CN1112
$10,100.00USD
#24590130 Bids
A&P 11-Ton Hopper Bottom Bin, 6-Legs, 4" Unload Auger with Motor, Payment to be Made by Saturday, January 23, 2020, Buyer's Responsibility to Disassemble Bin and Remove it Off Premises on or Before April 1, 2021

Item #24

A&P 11-Ton Hopper Bottom Bin, 6-Legs, 4" Unload Auger with Motor, Payment to be Made by Saturday, January 23, 2020, Buyer's Responsibility to Disassemble Bin and Remove it Off Premises on or Before April 1, 2021
Control Number:CN1007
$1,024.99USD
#1686444 Bids
Outdoor Wood Boiler Burn Chamber and Water Jacket, They are Fully Welded and Pressure Tested with No Leaks, They Need to be Finished, Can be Made into a Gasification or Regular Wood Boiler, They Hold 191-Gallons of Water, No Doors, but Opening is 25.5" Wide and 20" Tall, Firebox is 45" Long and 1/4" Thick, Water Jacket is 3/16" Thick

Item #25

Outdoor Wood Boiler Burn Chamber and Water Jacket, They are Fully Welded and Pressure Tested with No Leaks, They Need to be Finished, Can be Made into a Gasification or Regular Wood Boiler, They Hold 191-Gallons of Water, No Doors, but Opening is 25.5" Wide and 20" Tall, Firebox is 45" Long and 1/4" Thick, Water Jacket is 3/16" Thick

Control Number:CN1089
$370.00USD
#931720 Bids
Handler III Inductor, 3" Plumbing

Item #26

Handler III Inductor, 3" Plumbing
Control Number:CN1115
$1,624.99USD
#1223537 Bids
Calf Pen Gates, Made by Canarm Ag Systems, 35-Gates, 15-Latches, 17-Hinges, 17-Double Bucket Holders, 7-Bale Feeders

Item #27

Calf Pen Gates, Made by Canarm Ag Systems, 35-Gates, 15-Latches, 17-Hinges, 17-Double Bucket Holders, 7-Bale Feeders
Control Number:CN1076
$510.00USD
#3411542 Bids
2019 CNH/Trimble Nav 3 Controller, Version 9.8, Warranty until December 2021, New

Item #28

2019 CNH/Trimble Nav 3 Controller, Version 9.8, Warranty until December 2021, New
Control Number:CN1019
$3,950.00USD
#11886106 Bids
Hotsy Hot Power Washer, 110 Power, Diesel/Kerosene Burner, Model 610, Burns Hot, 100’ of Hose

Item #29

Hotsy Hot Power Washer, 110 Power, Diesel/Kerosene Burner, Model 610, Burns Hot, 100’ of Hose
Control Number:CN1073
$560.00USD
#2621839 Bids
Ford 5000 Diesel Tractor with Loader and Bail Spear, 1972 Purchased Used, Used Just to Bail Hay Last Six Years and Misc. Bucket Work or Used Bail Spear as Forks to Move Things, Works the Same as When Purchased, Lights DO NOT Work, Not Sure if all Gauges Work, Power Steering Leaks (Have Spare Power Steering Pump), Have Extra Lights (Not Installed), Can Switch from Bucket to Bail Spear but it is not a Skid Steer Type of Connection (Have to Remove Bolts, so it Takes a Little Longer)

Item #30

Ford 5000 Diesel Tractor with Loader and Bail Spear, 1972 Purchased Used, Used Just to Bail Hay Last Six Years and Misc. Bucket Work or Used Bail Spear as Forks to Move Things, Works the Same as When Purchased, Lights DO NOT Work, Not Sure if all Gauges Work, Power Steering Leaks (Have Spare Power Steering Pump), Have Extra Lights (Not Installed), Can Switch from Bucket to Bail Spear but it is not a Skid Steer Type of Connection (Have to Remove Bolts, so it Takes a Little Longer)
Control Number:CN1013
$7,200.00USD
#7521110 Bids
1985 GMC TopKick Truck, CAT Diesel, Truck was Used as a Seed Truck, Still has PTO, Lines Ran to the Rear to Pull Another Wagon or Auger, Could Use New Batteries, Been Sitting Two Years, Fresh Service December 2020, Clean and Clear Title

Item #31

1985 GMC TopKick Truck, CAT Diesel, Truck was Used as a Seed Truck, Still has PTO, Lines Ran to the Rear to Pull Another Wagon or Auger, Could Use New Batteries, Been Sitting Two Years, Fresh Service December 2020, Clean and Clear Title
Control Number:CN1140
$2,055.00USD
#1387375 Bids
2007 Ford F150 4WD, (190,000 Miles), 5.4  Auto, New Tires, Rack and Pinion, Control Arms, Struts, Ball Joints, Tires, Radiator, ECM Computer Module, Have New Brakes and Rotors in Box, Truck Runs Well but has an Exhaust Leak, Needs an Alternator and a Tie Rod Installed (which is Included), Needs a Front End Alignment Due to all the New Parts Installed, Clean and Clear Title

Item #32

2007 Ford F150 4WD, (190,000 Miles), 5.4 Auto, New Tires, Rack and Pinion, Control Arms, Struts, Ball Joints, Tires, Radiator, ECM Computer Module, Have New Brakes and Rotors in Box, Truck Runs Well but has an Exhaust Leak, Needs an Alternator and a Tie Rod Installed (which is Included), Needs a Front End Alignment Due to all the New Parts Installed, Clean and Clear Title

Control Number:CN1082
$3,450.00USD
#2405064 Bids
2014 Case 330 Turbo-Till, 26.5', 18+" Front Blades, 19.5" Rear Blades, Housed, Nice Condition

Item #33

2014 Case 330 Turbo-Till, 26.5', 18+" Front Blades, 19.5" Rear Blades, Housed, Nice Condition
Control Number:CN1129
$18,000.00USD
#2063156 Bids
Gehl 1475 4x5 Round Baler, 540 PTO, Variable Chamber, Auto and Manual Tie

Item #34

Gehl 1475 4x5 Round Baler, 540 PTO, Variable Chamber, Auto and Manual Tie
Control Number:CN1066
$3,850.00USD
#15126105 Bids
Pair of 24' Light Poles, 18” Bases, Need Repainted, Both are Missing Inspection Plates (Easy Fix Just Flat Steel)

Item #35

Pair of 24' Light Poles, 18” Bases, Need Repainted, Both are Missing Inspection Plates (Easy Fix Just Flat Steel)
Control Number:CN1072
$1,000.00USD
#1294558 Bids
Penta 4120-HD Mixer, New 3/4" Auger, Cross Conveyor

Item #36

Penta 4120-HD Mixer, New 3/4" Auger, Cross Conveyor

Control Number:CN1119
$8,700.00USD
#2260087 Bids
Fecon Mulcher for Skid Loader, Good Teeth, Everything Works

Item #37

Fecon Mulcher for Skid Loader, Good Teeth, Everything Works
Control Number:CN1042
$7,110.00USD
#1679882 Bids
John Deere Fixed Back Blade

Item #38

John Deere Fixed Back Blade
Control Number:CN1097
$45.00USD
#171165 Bids
John Deere 7100 Bean Planter, 11-Row, 20" Centers, Markers, Monitor, Kinze Brush Unit, 2-Sets of Plates, End Transport

Item #39

John Deere 7100 Bean Planter, 11-Row, 20" Centers, Markers, Monitor, Kinze Brush Unit, 2-Sets of Plates, End Transport
Control Number:CN1006
$4,250.00USD
#1393254 Bids
Deutz 130 06 4x4 Tractor with Blade, (Hour Meter Reads 6639 Hours), 1000 PTO, New Battery, Has Oil Pan Heater and Air Intake Heater for Cold Weather, Clutch Slipped a Few Years Ago when Used to Push Silage but When Used to Push Snow this Year with it, It Worked Fine, Runs Great

Item #40

Deutz 130 06 4x4 Tractor with Blade, (Hour Meter Reads 6639 Hours), 1000 PTO, New Battery, Has Oil Pan Heater and Air Intake Heater for Cold Weather, Clutch Slipped a Few Years Ago when Used to Push Silage but When Used to Push Snow this Year with it, It Worked Fine, Runs Great

Control Number:CN1088
$5,050.00USD
#15449135 Bids
Classic Model 5036 Outdoor Wood Burner, Great Stove

Item #41

Classic Model 5036 Outdoor Wood Burner, Great Stove

Control Number:CN1118
$2,050.00USD
#3502245 Bids
John Deere 980 32' Field Cultivator, 3-Bar Spike and Rolling Basket, Good Condition

Item #42

John Deere 980 32' Field Cultivator, 3-Bar Spike and Rolling Basket, Good Condition
Control Number:CN1040
$9,300.00USD
#624282 Bids
(1)-Ton of Feed Quality Straw, Round Bales, NOTE:  You are placing a Bid by the TON, Must Purchase a Minimum of 10-Tons (Can Purchase up to 100 Tons)

Item #43

(1)-Ton of Feed Quality Straw, Round Bales, NOTE: You are placing a Bid by the TON, Must Purchase a Minimum of 10-Tons (Can Purchase up to 100 Tons)
Control Number:CN1043
GRP2
$4,590.00USD
#4434913 Bids
(1)-Ton of Feed Quality Straw, Round Bales, NOTE:  You are placing a Bid by the TON, Must Purchase a Minimum of 10-Tons (Can Purchase up to 100 Tons)

Item #44

(1)-Ton of Feed Quality Straw, Round Bales, NOTE: You are placing a Bid by the TON, Must Purchase a Minimum of 10-Tons (Can Purchase up to 100 Tons)
Control Number:CN1045
GRP2
$70.01USD
#1679811 Bids
1989 Kenworth W900 Semi Tractor, 3406 Cat, 425 hp, 15-Speed, All New Tires, AC Works, Clean and Clear Title

Item #45

1989 Kenworth W900 Semi Tractor, 3406 Cat, 425 hp, 15-Speed, All New Tires, AC Works, Clean and Clear Title
Control Number:CN1036
$7,900.00USD
#31105161 Bids
Arts-Way 6812A Harvester, Double Unload Conveyors, No Need to Make Lands, 800 Tires, Extra Front Cleaning Roll, ($18,000 in New Rolls and Chains), Good Condition

Item #46

Arts-Way 6812A Harvester, Double Unload Conveyors, No Need to Make Lands, 800 Tires, Extra Front Cleaning Roll, ($18,000 in New Rolls and Chains), Good Condition

Control Number:CN1002
$18,250.00USD
#2114552 Bids
Hydraulic Winch, Ramsey RPH10000, 10000 lb. Rating, Has a Custom Cage Built Around it, Can be Used or Unbolted and Bolted up to Your Application, Good Working Condition

Item #47

Hydraulic Winch, Ramsey RPH10000, 10000 lb. Rating, Has a Custom Cage Built Around it, Can be Used or Unbolted and Bolted up to Your Application, Good Working Condition

Control Number:CN1075
$825.00USD
#189927 Bids
(2)-Mastercraft Baja RS Seats, Set up for 5-Point Harness, Storage Pouches on Back, Have Been Sitting in a Warehouse Covered for Years, Had them Professionally Cleaned, New (Still have Tags), Perfect for Jeep, Dune Buggy or Mud Truck Build, Seats Cost New Each $500 Plus

Item #48

(2)-Mastercraft Baja RS Seats, Set up for 5-Point Harness, Storage Pouches on Back, Have Been Sitting in a Warehouse Covered for Years, Had them Professionally Cleaned, New (Still have Tags), Perfect for Jeep, Dune Buggy or Mud Truck Build, Seats Cost New Each $500 Plus

Control Number:CN1070
GRP3
$365.00USD
#931730 Bids